Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Calabasas
Gate parts and welding in Calabasas means working inside one of Los Angeles County’s most HOA-dense zip codes, and we’ve been doing exactly that since well before the Woolsey Fire changed how every gate job gets approved. A typical hinge replacement runs $180-$340, a post replacement $400-$850, and custom welding starts around $250, depending on what has to be matched and what the architectural committee wants. We’re the crew that shows up with the welder on the truck, not the crew that hauls your gate off to a shop. Call (559) 314-7708 and Hal or one of his guys will pick up, day or night.
Why Gatewood Fence & Gate Is Calabasas’s Preferred Gate Parts & Welding Company
We’re not a national outfit with a website and a rented van. Hal Gatewood’s name is on the shop, his license number is published, and he’s been at this since 2001. Calabasas homeowners see the same faces on repeat calls because our crew has been welding and replacing gate hardware in The Oaks, The Oaks of Calabasas, and the custom-estate stretch along Mulholland Highway for years. Nobody from a call center is going to walk your HOA’s design-review board through a welded patch that changes the gate profile. We will.
Our Gate Parts & Welding team carries the right parts on the truck because we know what breaks here. FAAC swing operators on 1990s estates. LiftMaster slide-gate motors on newer builds. Mighty Mule units on the ranch-style properties up toward Old Topanga. When you call about a sagging gate in Calabasas, we already know the wind that torqued it, the HOA that governs it, and the finish that has to be matched. That saves you a second trip and a rejection letter.
Every job carries the 90-Day Done Right Promise in writing, not as a phone-script suggestion. If the hinge we welded or the post we set doesn’t hold, one call brings us back. No runaround, no fine print.
Our Gate Parts & Welding Services in Calabasas
Hinge Replacement
A sagging gate in Calabasas almost always starts at the hinge post, not the middle of the leaf. We replace worn pin hinges, barrel hinges, and weld-on strap hinges on ornate wrought-iron swing gates throughout Calabasas, matching the original profile so the gate still looks like the one the HOA approved in 1996. If the hinge post itself has shifted from wind loading, we correct that before we hang the gate back, because fixing the hinge without addressing the post means fixing it twice.
Post Replacement
The dominant housing stock here was built between the late 1980s and early 2000s, which means a lot of original gate posts are now 25 to 35 years old and starting to fail at the footing. We set new steel posts in concrete, weld the hinge mounts in place, and schedule the pour so the gate is only out of service for the shortest window possible. In gated communities like The Oaks of Calabasas, we coordinate with the management company before we dig, because underground conduit and irrigation lines run exactly where the old post used to sit.
Rail Repair
Slide gates take a beating in the wind corridor between the Santa Monica Mountains and the Simi Hills. We repair bent top rails, replace worn bottom rollers, and re-square frames that have twisted out of alignment. If the rail is too far gone, we’ll tell you straight instead of welding a patch onto a frame that’s already compromised.
Custom Welding
Older Calabasas estates are full of non-standard decorative work scrolls, spear tips, monogrammed panels, unusual picket spacing. You can’t order those parts from a catalog. We weld repair sections on site, grind and finish them to match the surrounding metal, and work from photos of the original gate when we need to reproduce something that’s been broken for years. HOA compliance matters here more than almost anywhere in Los Angeles County, so we document the before-and-after on every custom weld.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Calabasas
We service and stock parts for FAAC, LiftMaster, Mighty Mule, BFT, and the rest of the major operators you see on Calabasas driveways. When a 1999 FAAC unit finally gives out, we don’t tell you to replace the whole system because we can’t get a control board. We carry common repair parts, and we’re certified to work on nine major gate brands, so the fix is usually done in one visit instead of two weeks of waiting on a shipment. We also weld, so the frame, the post, and the operator all get addressed by one crew that actually knows how they work together.
Common Gate Parts & Welding Problems We See in Calabasas Homes
Here’s what we run into when we roll up to Calabasas properties, week after week:
- Santa Ana wind damage. The wind corridor between the Santa Monica Mountains and the Simi Hills funnels fall gusts straight into gate frames. Swing gates bend at the hinge post, slide gates jump their tracks, and operators burn out trying to fight the load. It’s the most predictable service spike of our entire year.
- HOA design-review rejection after work starts. A homeowner or even a less-local contractor replaces a hinge with a different profile or welds a patch that changes the gate’s overall shape, and the architectural committee flags it. Now the work has to be undone and redone. We pull the approval packet before we touch the gate.
- Post-Woolsey fire-hardening failures. Since the 2018 Woolsey Fire, many Calabasas HOAs require non-combustible intercom housings and fire-rated wiring conduit, even on repair jobs. A technician who swaps in a standard plastic housing fails the follow-up inspection. We know the requirement before we start.
- 25-to-35-year-old operators finally dying. Original FAAC, Elite, and early LiftMaster units installed at build-out are reaching end of life all over Calabasas. The gate frame itself may still be fine, which is why we repair the operator and weld any frame damage rather than selling a full replacement that isn’t needed.
Pricing for Gate Parts & Welding in Calabasas, CA
A hinge replacement in Calabasas typically runs $180-$340, depending on whether it’s a simple pin swap or a full weld-on replacement with finish matching. Post replacement runs $400-$850, which includes concrete, welding, and cleanup. Custom welding starts around $250 and goes up based on the detail work and the finish the HOA requires. Rail repair typically falls between $250-$500. Every price is quoted and agreed before any work starts, so the number we give you is the number on the invoice. We don’t do surprises. And if you’ve got a written estimate from another company, bring it over for a free second opinion.
We Also Serve Cities Near Calabasas
If you’re just over the line in Topanga, Agoura Hills, Oak Park, or Westlake Village, we cover you too. The HOA and wind profile shifts a little from city to city, but the work is the same: get the gate right, pass the inspection, and leave it stronger than we found it. Most of our Calabasas crew lives within a short drive of all four.
Serving Calabasas, CA - Our Local Coverage Area
We’re based in the Calabasas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Calabasas
Yes. We pull the approval packet with the management company before we start any gate work in a gated community like The Oaks or The Oaks of Calabasas, and we work from the HOA’s approved style, height, and finish standards so the repair passes the first walkthrough. If the committee wants to see samples or before-and-after photos, we provide them.
The wind corridor between the Santa Monica Mountains and the Simi Hills accelerates fall gusts straight into the gate face, which twists the hinge post and bends the frame at the leaf. We fix it by correcting the post first, then replacing or re-welding the hinges and re-hanging the leaf. Call (559) 314-7708 for an exact quote.
Yes, and in most Calabasas HOAs, the finish has to match the architectural committee’s approved color and texture. We photograph the surrounding metal before grinding and match the finish on the repair area so the gate looks original, not patched. That’s the difference between passing review and getting a correction letter.
Yes. When we replace or reinforce a gate post, we keep the existing non-combustible intercom housing and fire-rated conduit in place and work around it, or re-mount it to the new post with the same fire-rated components. We know post-Woolsey inspections catch standard plastic housings, so we don’t use them here.
Yes. Any gate with an automatic operator in Calabasas has to meet the same UL 325 entrapment protection rules as the rest of Los Angeles County, which means photo eyes, safety edges, and proper reversing sensitivity. When we repair or weld a gate that’s operator-driven, we verify those safety devices still work before we leave. Call (559) 314-7708 and we’ll come take a look.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Calabasas and the surrounding communities since 2001.