Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterElectric Gate Repair in Malibu, CA
If your electric gate in Malibu has stopped responding to your remote or is stuck halfway, you need a technician who understands that these systems are both a security measure and a daily convenience. We handle electric gate repair in Malibu with a focus on fixing what you already have rather than pushing for a full replacement. Most electric gate repairs in this area cost between $250 and $650, depending on whether you are looking at a simple gate realignment, a control board issue, or a motor failure. Call us at (559) 314-7708 to get a real person on the line who can actually talk through your problem.
I am Hal Gatewood, and at Gatewood Fence & Gate, I have been fixing residential and commercial gates since 2001. We do not believe in hauling your equipment off to a shop if we can fix it right in your driveway. My name is on the shop, and my reputation is tied to every job we touch. We provide professional Gate Repair for homeowners who are tired of being sold “solutions” they don’t need and just want their gate to close properly tonight.
When You Need Electric Gate Repair
Living in Malibu brings unique challenges to gate systems. The salt air and moisture can play havoc with delicate circuit boards, and the hilly terrain often puts extra strain on motors that were not installed with the right gear ratio for the slope. We see these issues constantly, and they usually start with small warning signs that homeowners ignore until the gate stops working entirely.
- The gate won’t close or keeps reversing: This is almost always a safety sensor issue. If the photo-eye sensors are misaligned, dirty, or corroded from the salt air, the gate thinks there is an obstruction and refuses to move.
- The gate is moving slowly or struggling on an incline: If you hear the motor laboring or the gate stopping midway, your capacitors might be failing, or the motor is struggling against the weight of the gate because of the local Malibu grade.
- Intermittent remote operation: If you have to stand right next to the antenna to get the gate to open, your receiver board is likely failing or suffering from signal interference.
- Grinding or scraping noises: If you hear metal on metal, stop using the gate immediately. This usually indicates a gear failure or a track alignment issue that will destroy the motor if you keep forcing it.
- The gate is stuck open: This is more than just an inconvenience; it is a security risk. When this happens, we prioritize your call to ensure your property is secured.
If you are experiencing any of these, call (559) 314-7708. We can often diagnose the issue over the phone and let you know if it is something you can safely reset or if you need a professional to come out.
Our Electric Gate Repair Process
We do not use a “replace everything” approach. When I show up to your house, the goal is to get your existing system running reliably again. We are certified to service nine major brands, including BFT, Linear, Viking, and Ghost Controls, so we usually have the parts on the truck to handle the repair in one visit.
- The Initial Call: When you call (559) 314-7708, you speak to a person, not a call center or a chatbot. We ask specific questions about the symptoms to ensure we bring the right parts for your specific make and model.
- On-Site Diagnosis: We arrive at your property in Malibu to inspect the entire system. A gate often sags in the hinge post, not in the middle, and that is where we start. If we fix the panel without fixing the post, you will be calling us again in six months.
- Repair and Welding: We perform on-site welding for gate frames and hinges. By keeping the work in your driveway, we save you the time and expense of removing the gate and hauling it to a shop.
- Electrical and Motor Testing: We check the control boards, limit switches, and safety sensors. We verify that the motor is receiving the correct voltage and that the safety reverse function is working according to code.
- The 90-Day Done Right Promise: Every job we finish is backed by our 90-Day Done Right Promise. If the repair does not hold, I will come back and make it right. No runaround, no excuses.
Safety Note: Please stay away from the high-voltage electrical components and the high-tension springs of your gate system. These operate under massive mechanical force and electrical current. If you see sparking, smell burning plastic, or notice a snapped cable, do not touch the equipment. Call us immediately to handle it safely.
Electric Gate Repair Pricing in Malibu
We believe in upfront pricing. You will not get a surprise bill when the work is done. We offer a free second opinion on any written estimate from another company, so if you think you are being overcharged elsewhere, give us a call. We also offer a permanent 10% discount for seniors and veterans, and we take $40 off any repair over $200.
| Service Item | Estimated Price Range |
|---|---|
| Sensor Alignment & Cleaning | $150 – $250 |
| Capacitor or Limit Switch Replacement | $250 – $400 |
| Control Board Repair/Replacement | $450 – $850 |
| On-Site Hinge or Frame Welding | $300 – $600 |
We do not charge a trip fee inside the county. If you are looking for Gate Repair in Malibu, we are the local choice that has been around since 2001. Call (559) 314-7708 for an exact quote.
FAQs - Electric Gate Repair
Can you fix my gate the same day I call?
Yes, we prioritize emergency repairs for gates that are stuck open or blocking your exit. Because we are locally owned and owner-operated, we don’t have to wait for dispatch approval from a corporate office to get to your home when you search for gate repair near me in Malibu, CA. Call (559) 314-7708 to see if we can fit you into today’s schedule.
Is it cheaper to repair my old motor or buy a new one?
In most cases, it is cheaper to repair. I have seen perfectly good motors replaced just because a $40 capacitor failed. We will always try to repair your existing unit first, provided it is still safe and reliable. If the motor is truly beyond saving, we will tell you honestly and provide an upfront price for a replacement.
How much does it cost to fix a gate that won’t close?
Most gate closure issues are caused by safety sensor misalignment or debris blocking the beam, which typically costs between $150 and $250 to resolve. If the problem is deeper, such as a faulty logic board or a wiring issue caused by salt air corrosion, the price will vary based on the parts required. Call (559) 314-7708 for an exact estimate.
Can I fix my electric gate myself?
I strongly advise against it if you are not experienced with high-voltage electrical work or heavy gate mechanics. Electric gates use high-tension springs and powerful motors that can cause serious injury if they release unexpectedly. A real expert knows exactly where the danger points are. It is safer and usually cheaper in the long run to have a professional handle the repair. Call (559) 314-7708 and let us take the risk for you.
The name is on the shop, and the shop is down the road. That is the oldest accountability there is. If you need someone who will actually show up and fix the problem the first time, reach out to Gatewood Fence & Gate. We have been serving this community since 2001, and we plan to be here for a long time yet. Call (559) 314-7708 for a free estimate and get your gate running again.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Malibu.