Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Repair in Agoura Hills, CA | Gatewood Fence & Gate
We provide Gate Repair in Agoura Hills for Ghost Controls gate openers, and we’ve been doing it long enough to know what breaks here that doesn’t break ten miles south. The short version: we’re an independent Ghost Controls service provider, not a manufacturer call center, and we fix the opener in your driveway. Call (559) 314-7708 and you’ll get a live person, not a queue.
Ghost Controls builds modular openers with a reputation for straightforward design. The TSS1 and DS1 lines share a control board architecture that’s easy to diagnose when you’ve seen a few hundred of them. Agoura Hills adds its own wrinkles: canyon wind loads, post-Woolsey rebuild wiring, and fire department access requirements that don’t show up on a factory troubleshooting chart. That combination is exactly what we work on most weeks. For broader Ghost Controls sales & service, we carry the same brand depth across the county.
Why Agoura Hills Residents Choose Us for Ghost Controls Service
Hal Gatewood started fixing gates up and down the Malibu coast in 2001, and most of what he knows about Ghost Controls hardware came from sorting out salt-rusted hinges and stripped motor gears on properties out past Point Dume. He picked up the trade at Santa Monica College, running through their vocational and applied technology programs, and he’s been owner-operated ever since. No faceless crew. The name is on the shop, and the shop is down the road.
Agoura Hills homeowners call us because we stock genuine Ghost Controls boards, gears, and remote receivers locally, and we don’t make you wait on a parts truck from Texas. When a TSS1 control board fails on a hillside gate off Reyes Adobe Road, you want it running that day. We also carry quality aftermarket limit switches and capacitors for older models where OEM parts are backordered. In Agoura Hills service area coverage, that local inventory is the difference between a gate that works tonight and one that stays open for a week.
Every job carries our 90-Day Done Right Promise, stamped in writing. Not fine print. If it’s not done right, one call brings Hal back.
Common Ghost Controls Gate Repair Problems We Solve in Agoura Hills
- Rust-seized motor mounting brackets. Fog drip off Ladyface Mountain and post-Woolsey irrigation keep hillside hardware damp well into summer. We’re regularly freeing corroded Ghost Controls TSS1 brackets and re-mounting motors with proper isolation so the rust doesn’t return in two seasons.
- Overheated control boards after Santa Ana gusts stall heavy wrought-iron leaves mid-cycle. When a gate that wide catches a 50-mph gust, the motor strains against it. The Ghost Controls board reads the stall as overload, cycles repeatedly, and burns out. We strengthen the drive path and recalibrate the board, not just swap it and wait for the next wind event.
- Stripped nylon drive gears inside Ghost Controls linear actuators. Sloped driveways where the gate meets the street at an angle put uneven load on the gear teeth. We see it on the long, sloped hillside tracts built in the 1980s. Rebuild the actuator with fresh gears and seals, and the gate runs quiet again.
- Phantom obstruction faults from mismatched wiring. A newer Ghost Controls board spliced into 1987 underground conduit will read fluctuating voltage as a stuck safety sensor. We run new low-voltage lines rather than band-aiding a board the fire-rebuild contractor never should have touched.
- Battery backup systems draining during fire-season power shutoffs. Red flag wind events mean utility shutdowns. On older homes with undersized circuits, the Ghost Controls float charger never gets enough current to top off the battery. We rewire the charger and test the full backup cycle.
Ghost Controls Service in Agoura Hills: What Local Conditions Mean for Your Equipment
Agoura Hills is one of the few communities in Los Angeles County where post-Woolsey Fire Agoura Hills Gate Installation rebuilds are still inspected for gravity-drop safety and emergency access by the LA County Fire Department. Failing a Knox-Box or keypad check can stall a final occupancy sign-off. That means many Ghost Controls openers here are paired with aftermarket access keypads the fire department requires, which are not part of the factory controller and often cause interlock issues we trace back to the added relay.
Tell me what it’s doing wrong and I’ll tell you what it actually needs, no runaround. In one hillside neighborhood off Reyes Adobe Road, our tech found a Ghost Controls TSS1 that would refuse to close except in 5-second bursts, then stop with a flashing obstruction fault. The original 1987 underground wire had been reused by a fire-rebuild contractor, and the Ghost Controls board was reading fluctuating voltage as a stuck safety sensor. We ran new low-voltage conduit across the slope, replaced the board, and recalibrated the gate to handle the prevailing Santa Ana wind loads. Zero phantom faults since. That’s the kind of repair nobody in Thousand Oaks proper deals with, because their gates never had to survive a Woolsey rebuild inspection.
Ghost Controls Models & Products We Service in Agoura Hills
We cover the full Ghost Controls residential lineup: the TSS1 Automatic Gate Opener, the DS1 DIY Slide Gate Opener, the SWG Series Swing Gate Opener, and the AXDP Advanced Series. The modular motor-and-controller design means we can often rebuild a linear actuator or swap a control board without replacing the entire opener. We use genuine Ghost Controls replacement boards, gears, and remote receivers whenever lead time allows. When OEM parts are backordered, we install quality aftermarket limit switches or capacitors and tell you exactly what we did and why.
For Ghost Controls operators that have been through repeated storm or fire-wind damage, we give a straight answer: repair the drive components only if the gate itself is still true. A sags in the hinge post, not in the middle, and that is where we start. Fix the panel without the post and you’ll fix it twice. If the gate is warped, we rebuild the hinges and replace the opener together.
Ghost Controls Service Pricing in Agoura Hills
| Service | Price Range |
|---|---|
| Ghost Controls control board replacement on TSS1 | $220-$480 |
| Linear motor actuator rebuild (gears, spindle, seals) for Ghost Controls swing or slide opener | $280-$520 |
| Gate realignment and hinge weld repair on hillside wrought-iron gate with Ghost Controls operator | $180-$450 |
| Battery backup system wiring and charger upgrade for Ghost Controls with fire-safety keypad interlock | $130-$350 |
What drives the cost: whether the board is truly dead or just miswired, whether the actuator needs a full gear rebuild or a seal replacement, and whether the gate itself is still square. Our free estimate includes a full inspection of the drive path, the wiring, and the gate geometry. The price we quote is the price you pay, agreed before any work starts. Call (559) 314-7708 for an exact quote, and ask about $40 off any repair over $200. No trip charge inside the county.
Serving Agoura Hills, CA - Our Local Coverage Area
We’re based in the Agoura Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in Agoura Hills
Usually not. The motor is fighting wind load against a gate that’s out of balance or slightly warped. In Agoura Hills, where Santa Ana gusts funnel hard through Chesebro Canyon and along the Medea Creek corridor, a properly balanced gate handles wind without stalling. We check hinge wear, gate true, and force settings before recommending any motor replacement. Most of these calls end with a realignment, not a new opener. Call (559) 314-7708 and we’ll tell you what’s actually wrong.
Yes, and this is a repair we do regularly in Agoura Hills. The Knox switch and fire access relay are wire-interlocked with the Ghost Controls controller through an added relay that the factory never intended. When the relay is wired wrong, it backfeeds the controller’s accessory circuit and kills the keypad. We rewire the fire relay properly and restore full Ghost Controls keypad and remote function. No, we void nothing; we repair the interlock to code.
Often the charger itself is fine, but it’s wired to an undersized circuit from a 1980s house, so the float charger never gets enough current to maintain the battery. During red flag events when the utility cycles or the backup gets called into readiness, the low-voltage alarm triggers. We rewire the charger to a dedicated circuit, test the full backup cycle, and usually stop the beeping without replacing the backup unit. Call (559) 314-7708 and we’ll sort it before the next shutoff.
Not yet. A gear that strips repeatedly is a symptom: the gate is out of true or the hinges are worn, so the actuator is fighting geometry instead of just moving the gate. If we rebuild the gear without fixing the gate alignment, we’re selling you a third gear. We realign the gate, rebuild the hinge posts if needed, and then rebuild the actuator. You get one repair that lasts, which is cheaper than a new opener and a new gear every eighteen months.
Yes. This is one of the most common calls we get in the canyon-edge parcels of Agoura Hills. The fire-rebuild contractor mounted the opener, but never ran the full obstruction sensor learn cycle or adjusted the force limits. We relineate the sensors, recalibrate the board, and tune the limits for the actual gate weight and swing arc. The opener usually works fine once someone has actually dialed it in. Call (559) 314-7708 for a free second opinion on any written estimate you already have.
Service Areas Near Agoura Hills
We’re based close enough to cover Agoura Hills, Calabasas, Topanga, Lake Sherwood, and Ghost Controls service in Malibu. We also run Ghost Controls calls in Ghost Controls service in Westlake Village and the hills between. If you’re not sure whether we cover your street, call and ask. The shop is easy to find, and so are we.
Book Your Ghost Controls Service in Agoura Hills Today
Call (559) 314-7708 and a live person answers, day or night. We’ll set a window we actually keep and show up with the parts to fix it. Free estimate, price agreed before any work starts. If it’s an emergency, ask about same-day service.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Agoura Hills since 2001.